Posts Tagged ‘flexwand’

FW430TPB

Thursday, June 16th, 2011

30 kHz 4.7 foot cardioid system with tripod base

The FlexWand™ is a combination of a 30kHz High Definition Microphone™ and a low profile microphone stand and boom as a single unit. It allows the microphone head to be positioned as high as 4.7 feet and as low as 10 inches from the floor or anywhere in between. There are no visible wires or cables above floor level. Visually it is low profile, smooth, sleek and clean. The FlexWand™ is the ideal solution for applications where the utmost in sound quality and a low profile is required. Now you don’t have to find a mic, attach the mic clip to the stand and then dress the cable around the stand. Just pick up the FlexWand™, position it and plug the mic cable into the base.

  • Cardioid polar pattern
  • Frequency response of 30Hz to 30kHz
  • Near perfect polar response and the ability to reject sounds from the rear of the microphone, making it a perfect solution for choirs and vocal groups
  • Large flex section near the center of the stand that couples the stand and the wand
  • Mini-gooseneck between the end of the wand and the microphone head
  • The combination of a mid-flex section and the mini flex on the wand provide an infinite combination of placement options between 10 inches and 4.7 feet
  • Substantial improvement in gain before feedback
  • The near perfect polar response of the FlexWand™ allows the use of fewer microphones on choir, with better sound quality, no spotlighting and incredible rejection of sounds from the rear of the microphone
  • Ideal where bands or orchestras are placed in front of a choir, as the FlexWand™ will reject much of the sound of the band or orchestra
  • The tripod base allows for easy transport

    Share and Enjoy:
    • Print
    • PDF
    • Add to favorites
    • email
    • Digg
    • Google Bookmarks
    • FriendFeed
    • MySpace
    • LinkedIn
    • Facebook
    • Twitter

    FW430

    Thursday, June 16th, 2011

    30 kHz 4.7 foot cardioid system

    The FlexWand™ is a combination of a 30kHz High Definition Microphone™ and a low profile microphone stand and boom as a single unit. It allows the microphone head to be positioned as high as 4.7 feet and as low as 10 inches from the floor or anywhere in between. There are no visible wires or cables above floor level. Visually it is low profile, smooth, sleek and clean. The FlexWand™ is the ideal solution for applications where the utmost in sound quality and a low profile is required. Now you don’t have to find a mic, attach the mic clip to the stand and then dress the cable around the stand. Just pick up the FlexWand™, position it and plug the mic cable into the base.

    • Cardioid polar pattern
    • Frequency response of 30Hz to 30kHz
    • Near perfect polar response and the ability to reject sounds from the rear of the microphone, making it a perfect solution for choirs and vocal groups
    • Large flex section near the center of the stand that couples the stand and the wand
    • Mini-gooseneck between the end of the wand and the microphone head
    • The combination of a mid-flex section and the mini flex on the wand provide an infinite combination of placement options between 10 inches and 4.7 feet
    • Substantial improvement in gain before feedback
    • The near perfect polar response of the FlexWand™ allows the use of fewer microphones on choir, with better sound quality, no spotlighting and incredible rejection of sounds from the rear of the microphone
    • Ideal for miking individual orchestra instruments such as violins and cellos, as well as acoustic guitars and instrument amplifiers
    • The sturdy 12 pound base will not allow the FlexWand™ to be accidentally knocked over

    Share and Enjoy:
    • Print
    • PDF
    • Add to favorites
    • email
    • Digg
    • Google Bookmarks
    • FriendFeed
    • MySpace
    • LinkedIn
    • Facebook
    • Twitter

    FW730/HC-TPB

    Thursday, June 16th, 2011

    30 kHz 7 foot hypercardioid system with tripod base

    The FlexWand™ is a combination of a 30kHz High Definition Microphone™ and a low profile microphone tripod stand and boom as a single unit. It allows the microphone head to be positioned as high as 7 feet and as low as 1.5 feet from the floor or anywhere in between. There are no visible wires or cables above floor level. Visually it is low profile, smooth, sleek and clean. The FlexWand™ is the ideal solution for applications where the utmost in sound quality and a low profile is required. Now you don’t have to find a mic, attach the mic clip to the stand and then dress the cable around the stand. Just pick up the FlexWand™, position it and plug the mic cable into the base.

    • Hypercardioid polar pattern
    • Frequency response of 30Hz to 30kHz
    • Near perfect polar response and the ability to reject sounds from the rear of the microphone, making it a perfect solution for choirs and vocal groups
    • For applications requiring a tighter pickup pattern with greater off-axis rejection
    • Large flex section near the center of the stand that couples the stand and the wand
    • Mini-gooseneck between the end of the wand and the microphone head
    • The lower section of the stand is 3/4” in diameter and the 24 inch wand is 5/16” in diameter with a 4.5” mini-gooseneck connected at the end which connects to the High Definition Microphone™ head
    • The combination of a mid-flex section and the mini flex on the wand provide an infinite combination of placement options between 1.5 feet and 7 feet
    • Substantial improvement in gain before feedback
    • The near perfect polar response of the FlexWand™ allows the use of fewer microphones on choir, with better sound quality, no spotlighting and incredible rejection of sounds from the rear of the microphone
    • Ideal where bands or orchestras are placed in front of a choir, as the FlexWand™ will reject much of the sound of the band or orchestra
    • The tripod base allows for easy transport

      Share and Enjoy:
      • Print
      • PDF
      • Add to favorites
      • email
      • Digg
      • Google Bookmarks
      • FriendFeed
      • MySpace
      • LinkedIn
      • Facebook
      • Twitter

      FW430/HC-TPB

      Thursday, June 16th, 2011

      30 kHz 4.7 foot hypercardioid system with tripod base

      The FlexWand™ is a combination of a 30kHz High Definition Microphone™ and a low profile microphone tripod stand and boom as a single unit. It allows the microphone head to be positioned as high as 4.7 feet and as low as 10 inches from the floor or anywhere in between. There are no visible wires or cables above floor level. Visually it is low profile, smooth, sleek and clean. The FlexWand™ is the ideal solution for applications where the utmost in sound quality and a low profile is required. Now you don’t have to find a mic, attach the mic clip to the stand and then dress the cable around the stand. Just pick up the FlexWand™, position it and plug the mic cable into the base.

      • Hypercardioid polar pattern
      • Frequency response of 30Hz to 30kHz
      • Near perfect polar response and the ability to reject sounds from the rear of the microphone, making it a perfect solution for choirs and vocal groups
      • For applications requiring a tighter pickup pattern with greater off-axis rejection
      • Large flex section near the center of the stand that couples the stand and the wand
      • Mini-gooseneck between the end of the wand and the microphone head
      • The combination of a mid-flex section and the mini flex on the wand provide an infinite combination of placement options between 10 inches and 4.7 feet
      • Substantial improvement in gain before feedback
      • The near perfect polar response of the FlexWand™ allows the use of fewer microphones on choir, with better sound quality, no spotlighting and incredible rejection of sounds from the rear of the microphone
      • Ideal for miking individual orchestra instruments such as violins and cellos, as well as acoustic guitars and instrument amplifiers
      • The tripod base allows for easy transport

        Share and Enjoy:
        • Print
        • PDF
        • Add to favorites
        • email
        • Digg
        • Google Bookmarks
        • FriendFeed
        • MySpace
        • LinkedIn
        • Facebook
        • Twitter

        The FlexWand™ at NAMM 2011

        Tuesday, January 25th, 2011

        Our Product Specialist, Craig, giving an explanation of our FlexWand™ at NAMM 2011 to Convention TV. Click here for more information on the FlexWand™.

        Share and Enjoy:
        • Print
        • PDF
        • Add to favorites
        • email
        • Digg
        • Google Bookmarks
        • FriendFeed
        • MySpace
        • LinkedIn
        • Facebook
        • Twitter

        Earthworks Introduces FlexWand™ High Definition Microphone™ With Integrated Stand And Boom

        Tuesday, June 15th, 2010

        Milford, NH, December 16, 2008 – Earthworks, manufacturer of High Definition Microphones™, announced that its FlexWand™ High Definition Microphone™ is now shipping to retail outlets and sound contractors on a worldwide basis. The FlexWand™ makes its debut following the highly successful introduction of the PianoMic™ System, winner of multiple industry awards including the prestigious Mix Foundation’s TEC Award for Outstanding Technical Achievement.

        The FlexWand™, which consists of a fully integrated small diaphragm condenser microphone stand and boom, is a sonically superior microphone solution that was originally designed for choral miking applications. The microphone capsule has a frequency response of 30Hz to 30kHz and can handle up to 145 dB SPL, (comparable in performance to an Earthworks SR30) and is available in both cardioid and hypercardioid patterns.

        The FlexWand™ boasts a sleek, low profile design with no visible wires above floor level. The flex mid-section and mini gooseneck on the wand allow the mic to be easily positioned between 1.5 ft. to 7 ft. above floor level. While the FlexWand™ was conceived for choral miking applications, it is also capable of delivering outstanding results on a variety of other sources such as acoustic instruments, drums and podium speech.

        Larry Blakely, director of product development for Earthworks, commented: “Our FlexWand™ is another example of how Earthworks listens to its customers and responds by developing products that are nothing short of revolutionary. We are finding more and more ways to incorporate High Definition Microphone™ technologies into superior audio products.”

        “Conventional microphones, booms and stands with dangling cables in front of musical performers is most often unsightly,” he continued. “The FlexWand™ resolves these issues in one elegant, integrated product that sounds extraordinary and is visually appealing. The FlexWand™ makes it nearly effortless to capture sonic excellence in choral performances, while completely removing the hassle of set up and negative visual factors.”

        The FlexWand™ can deliver much higher quality with far more detail than conventional microphones. This is in addition to the added benefits of near-perfect polar response, improved gain before feedback and high rejection of sounds from the rear of the microphone. Its near perfect polar response can cover an 80-person chorus with just three mics, with no section or voices protruding unnaturally. The high rejection of sound sources at the rear of the microphone has obvious advantages in live settings or where instrument bleed may be a concern.

        Franklin Denham, Minister of Music at Meridian, Mississippi’s Highland Baptist Church, commented, “During the past year, we have had the privilege of testing Earthwork’s FlexWand™ microphones on our church choir. Almost immediately following our initial performances with the mics, several members of our congregation began complementing us on the improvement in choir sound quality. The FlexWands are nearly invisible from the congregation; they are easy to set up, discreet and deliver an incredible sound. Having used the FlexWands, we found that we could not get along without them. So, we now have our own FlexWands that make an incredible audible improvement in our choir performances.”

        Share and Enjoy:
        • Print
        • PDF
        • Add to favorites
        • email
        • Digg
        • Google Bookmarks
        • FriendFeed
        • MySpace
        • LinkedIn
        • Facebook
        • Twitter

        Earthworks’ FlexWand™ High Definition Microphone™ Nominated for TEC Award, Outstanding Technical Achievement Category

        Monday, June 14th, 2010

        Announcement by Mix Foundation Marks 10th Time Earthworks has Been Nominated for One of Audio Industry’s Most Coveted Awards

        Milford, NH, August 18, 2009 – Earthworks, the High Definition Microphone™ manufacturer, announced that its revolutionary new FlexWand™ High Definition Microphone™ has been nominated for the Mix Foundation’s 25th Annual Technical Excellence & Creativity Awards, to be held this October at the 127th AES Convention in New York City.

        This announcement by The Mix Foundation earlier this month marks the tenth time an Earthworks product has been nominated for a TEC Award.

        The FlexWand™ made its debut earlier this year following the highly successful introduction of the PianoMic™ System, which won the TEC Award for Outstanding Technical Achievement in the Microphone/Recording Technology category last year. The TEC Awards were founded by the Mix Foundation for Excellence in Audio, to recognize outstanding achievement in audio production and product innovation.

        Heidi Blackmer Robichaud, president of Earthworks, commented: “We are pleased the Mix Foundation found the FlexWand™ worthy of consideration for a TEC Award and are especially grateful that the industry recognizes the innovation that Earthworks has brought to the professional audio industry since our company’s inception. Our FlexWand™ solution is both sonically superior and aesthetically attractive, making it ideal for a range of applications and installations.”

        The FlexWand™ boasts a sleek, low profile design with no visible wires above floor level. The flex mid-section and mini gooseneck on the wand allow the mic to be easily positioned between 1.5 ft. to 7 ft. above floor level.

        Consisting of a fully integrated small diaphragm condenser microphone stand and boom, the FlexWand™ was originally designed for choral miking applications but is also capable of delivering outstanding results on a variety of other sources such as acoustic instruments, drums and podium applications. Its microphone capsule has a frequency response of 30Hz to 30kHz, can handle up to 145 dB SPL (comparable in performance to an Earthworks SR30), and is available in both cardioid and hypercardioid patterns.

        About Earthworks

        Earthworks is a New Hampshire, U.S.A. based company that is dedicated to quality and sonic excellence. Each Earthworks product is hand made with great care, meticulous attention to detail and a strong emphasis on quality. Earthworks prides itself in making only the very best in professional audio equipment and it is all made right here in the U.S.A

        Share and Enjoy:
        • Print
        • PDF
        • Add to favorites
        • email
        • Digg
        • Google Bookmarks
        • FriendFeed
        • MySpace
        • LinkedIn
        • Facebook
        • Twitter

        FW730/HC

        Monday, May 24th, 2010

        30 kHz 7 foot hypercardioid microphone system

        The FlexWand™ is a combination of a 30kHz High Definition Microphone™ and a low profile microphone stand and boom as a single unit. It allows the microphone head to be positioned as high as 7 feet and as low as 1.5 feet from the floor or anywhere in between. There are no visible wires or cables above floor level. Visually it is low profile, smooth, sleek and clean. The FlexWand™ is the ideal solution for applications where the utmost in sound quality and a low profile is required. Now you don’t have to find a mic, attach the mic clip to the stand and then dress the cable around the stand. Just pick up the FlexWand™, position it and plug the mic cable into the base.

        • Hypercardioid polar pattern
        • Frequency response of 30Hz to 30kHz
        • Near perfect polar response and the ability to reject sounds from the rear of the microphone, making it a perfect solution for choirs and vocal groups
        • For applications requiring a tighter pickup pattern with greater off-axis rejection
        • Large flex section near the center of the stand that couples the stand and the wand
        • Mini-gooseneck between the end of the wand and the microphone head
        • The lower section of the stand is 3/4” in diameter and the 24 inch wand is 5/16” in diameter with a 4.5” mini-gooseneck connected at the end which connects to the High Definition Microphone™ head
        • The combination of a mid-flex section and the mini flex on the wand provide an infinite combination of placement options between 1.5 feet and 7 feet
        • Substantial improvement in gain before feedback
        • The near perfect polar response of the FlexWand™ allows the use of fewer microphones on choir, with better sound quality, no spotlighting and incredible rejection of sounds from the rear of the microphone
        • Ideal where bands or orchestras are placed in front of a choir, as the FlexWand™ will reject much of the sound of the band or orchestra
        • The sturdy 12 pound base will not allow the FlexWand™ to be accidentally knocked over

        FW730/HC User’s Manual

        Share and Enjoy:
        • Print
        • PDF
        • Add to favorites
        • email
        • Digg
        • Google Bookmarks
        • FriendFeed
        • MySpace
        • LinkedIn
        • Facebook
        • Twitter

        FW730

        Monday, May 24th, 2010

        30kHz 7 foot cardioid microphone system

        The FlexWand™ is a combination of a 30kHz High Definition Microphone™ and a low profile microphone stand and boom as a single unit. It allows the microphone head to be positioned as high as 7 feet and as low as 1.5 feet from the floor or anywhere in between. There are no visible wires or cables above floor level. Visually it is low profile, smooth, sleek and clean. The FlexWand™ is the ideal solution for applications where the utmost in sound quality and a low profile is required. Now you don’t have to find a mic, attach the mic clip to the stand and then dress the cable around the stand. Just pick up the FlexWand™, position it and plug the mic cable into the base.

        • Cardioid polar pattern
        • Frequency response of 30Hz to 30kHz
        • Near perfect polar response and the ability to reject sounds from the rear of the microphone, making it a perfect solution for choirs and vocal groups
        • Large flex section near the center of the stand that couples the stand and the wand
        • Mini-gooseneck between the end of the wand and the microphone head
        • The lower section of the stand is 3/4” in diameter and the 24 inch wand is 5/16” in diameter with a 4.5” mini-gooseneck connected at the end which connects to the High Definition Microphone™ head
        • The combination of a mid-flex section and the mini flex on the wand provide an infinite combination of placement options between 1.5 feet and 7 feet
        • Substantial improvement in gain before feedback
        • The near perfect polar response of the FlexWand™ allows the use of fewer microphones on choir, with better sound quality, no spotlighting and incredible rejection of sounds from the rear of the microphone
        • Ideal where bands or orchestras are placed in front of a choir, as the FlexWand™ will reject much of the sound of the band or orchestra
        • The sturdy 12 pound base will not allow the FlexWand™ to be accidentally knocked over

        FW730 User’s Manual

        Share and Enjoy:
        • Print
        • PDF
        • Add to favorites
        • email
        • Digg
        • Google Bookmarks
        • FriendFeed
        • MySpace
        • LinkedIn
        • Facebook
        • Twitter

        FlexWand™ Series

        Monday, May 24th, 2010

        A microphone, boom and stand as a single unit for choir or musical instruments in live sound and recording applications

        The FlexWand™ is a combination of a 30kHz High Definition Microphone™ and a low profile microphone stand and boom as a single unit. There are no visible wires or cables above floor level. Visually it is low profile, smooth, sleek and clean. The FlexWand™ is the ideal solution for applications where the utmost in sound quality and a low profile is required. Now you don’t have to find a mic, attach the mic clip to the stand and then dress the cable around the stand. Just pick up the FlexWand™, position it and plug the mic cable into the base.
        • Frequency response of 30Hz to 30kHz
        • Near perfect polar response and the ability to reject sounds from the rear of the microphone, making it a perfect solution for choirs and vocal groups
        • Large flex section near the center of the stand that couples the stand and the wand
        • Mini-gooseneck between the end of the wand and the microphone head
        • The combination of a mid-flex section and the mini flex on the wand provide an infinite combination of placement options between 1.5 feet and 7 feet for the FW730 and 10 inches and 4.7 feet for the FW430
        • Substantial improvement in gain before feedback
        • The near perfect polar response of the FlexWand™ allows the use of fewer microphones on choir, with better sound quality, no spotlighting and incredible rejection of sounds from the rear of the microphone
        • Ideal where bands or orchestras are placed in front of a choir, as the FlexWand™ will reject much of the sound of the band or orchestra
        • The sturdy 12 pound base will not allow the FlexWand™ to be accidentally knocked over
        • The tripod base models allow for easy transport

        How Earthworks microphones can dramatically improve the quality of your worship services.

        730 Models

        FW7307 Foot Cardioid FlexWand™

        FW730/HC - 7 Foot Hypercardioid FlexWand™

        730 Tripod Base Models

        FW730TPB - 7 Foot Cardioid FlexWand™ with Tripod Base

        FW730/HC-TPB – 7 Foot Hypercardioid FlexWand™ with Tripod Base

        430 Models

        FW430 - 4.7 Foot Cardioid FlexWand™

        FW430/HC – 4.7 Foot Hypercardioid FlexWand™

        430 Tripod Base Models

        FW430TPB - 4.7 Foot Cardioid FlexWand™ with Tripod Base

        FW430/HC-TPB – 4.7 Foot Hypercardioid FlexWand™ with Tripod Base

        Related Accessory

        SRW3 Foam windscreen

        How many FlexWands™ do you see?

        How many FlexWands™ do you see?

        Share and Enjoy:
        • Print
        • PDF
        • Add to favorites
        • email
        • Digg
        • Google Bookmarks
        • FriendFeed
        • MySpace
        • LinkedIn
        • Facebook
        • Twitter
      • Testimonials

        avatar"The Earthworks PianoMic™ is simply incredible. It has improved my live piano sound far beyond anything...
        —Gino Vannelli