DK7 Drum Kit System

Microphone Kit for Full Drum Set

Premium condenser microphone drum kit for capturing your full drum set

  • Drum microphones for live sound and recording

  • Includes 4 DM20 DrumMics, 4 RM1 RimMounts, 2 SR25 microphones, 1 SR20LS microphone, 3 microphone clips and rugged carrying case

From $2999

BUY IT NOW
  • Improved impulse response for faster and more accurate transients
  • Shorter diaphragm settling time to prevent quieter attacks from being blurred by earlier loud attacks
  • Extended frequency response to 25 kHz to capture a crisper and more realistic image
  • Near perfect polar patterns that remain even across all frequencies and at any position within the pattern
  • More cohesive and unified drum sound
  • Hear more attack and subtle detail
  • Increased detail and dynamic range
  • Versatile, multi-use mics
  • Mics are protected in a high impact case
  • Ideal three-mic choice for live performance or recording in less than ideal acoustic environments
  • Fast setup and teardown
  • Comes with 3 SR25s (two for overheads and one for kick drum), 1 KickPad™, 1 windscreen
  • The patented cardioid pattern on the SR25 provides a more uniform off-axis response and has less susceptibility to acoustic feedback

 

DM20 Specifications

Frequency Response: 50Hz to 20kHz ±2dB at 12 inches (30cm)

Polar Pattern: Cardioid

Sensitivity: 8mV/Pa (-42dBV/Pa)

Power Requirements: 24-48V Phantom, 10mA

Max Acoustic Input: 145dB SPL

Signal-to-Noise Ratio: 72dB A-weighted

Output: XLR (pin 2+)

Output Impedance: 200Ω balanced (between pins 2 & 3)

Min Output Load: 600Ω between pins 2 & 3

Noise: 20dB SPL equivalent (A weighted)

Dimensions L x D: 275mm x 22mm (10.75 x .860 inches)

Gooseneck Length: 159mm (6.75 inches)

Weight: .25 lb. (1.13kg)

SR25 Specifications

Frequency Response: 50Hz – 25kHz ±2dB at 12 inches (30cm)

Polar Pattern: Cardioid

Sensitivity: 10mV/Pa (-40dBV/Pa)

Power Requirements: 24-48V Phantom, 10mA

Max Acoustic Input: 145dB SPL

Output: XLR (pin 2+)

Output Impedance: 65Ω balanced (between pins 2 & 3)

Min Output Load: 600Ω between pins 2 & 3

Noise: 20dB SPL equivalent (A weighted)

Dimensions L x D: 165mm x x 22mm (6.5 x .860 inches)

Weight: .35 lb (160g)

  • Drums/Percussion
  • (3) Mc1 Microphone Clip
  • (3) SRW3 Foam Windscreen
  • (1) KP1 KickPad™
  • (1) DK25-C Aluminum Carrying Case